PART CODES:

J3-Saini C-99 Water Cable Sensor Sensing Cable Length (add type to above code)
■ -2Mtr...........................2 meters (6.56ft)
■ -5Mtr...........................5 meters (16.4ft)
■ -10Mtr.........................10 meters (32.81ft)
■ -15Mtr.........................15 meters (49.21ft)
■ -20Mtr..........................20meters (65.62ft)
■ -25M........................... 25 meters (82.02ft) Custom lengths available on request.

INSTALLATION (J3-Saini C-99):

1. Fit the cable sensor to the floor, using the J3 Clips or other suitable nonconductive fixings.

2. Connect the 2 core leader cable to the J3 Saint Panel or alarm module and terminate at the sensor input (polarity independent). The cable can be extended if required using a 2-core cable to a maximum of 100 meters (328ft).

3. You can test the cable by placing a wet cloth over the cable to simulate a water leak, the J3 Water Leak Panel will come on in Alarm. Remove the rag and when the cable driest Normal the panel kindly press the Reset key on the Panel.